Make Wipe Battery Stats application using the Battery Calibration(Recommended method): How to make Wipe Battery Stats of our battery from the ClockworkMod Recovery
One of the most common problems we encounter those who are constantly making changes or Roms Firmware our Android devices, is that the battery life is pretty suffers, and eventually last us much less than it should last us.
In the ROM based ICS or MIUI, it is a proven fact, consuming rather more battery than normal by comparison with the original for our devices Roms Stock, also depends heavily on the use ourselves we give to our terminals, but as Overall we should last longer than it actually last.
This is because the battery makes us literally crazy and not really know where load percentage is in reality may be that as we change firmwares or Roms, if we are not doing correctly Wipe battery stats, the battery of our lives device deceived and think that is already fully charged when not even be 50% of its capacity.
In what follows I will explain, we will have to learn two simple methods of how to do a Wipe Battery Stats in the right way.
One is simply an application available on the Play Store following his simple instructions, the other system and I personally recommend, it will do so from the ClockworkMod-Recovery modified our rooted terminal.
Make Wipe Battery Stats application using the Battery Calibration
- First What we should do is to unburden the application from the Play Store or by clicking here.
- Once we have installed on our device, execute it and we will give superuser permissions.
- Once opened connect the phone to the charger, preferably at the mains charger no USB to computer.
- When the application concerned audible and visual alert us that our battery is charged to 100%, we still leave it charging about 20 minutes to 30 minutes more.
- Now we will press on the button that says Battery Calibration, confirm if we should ask as the message that the battery is now calibrated, we can disconnect the charger from the device we report.
- Now we can use the device normally, and we let the battery completely runs until the terminal is turned off.
- In this step with the device off, because it has completely exhausted the battery, connect back to its charger and leave it loaded without disturbing or interrupting until you tell us it is 100% charged.
- What will light and use it regularly, but leaving again depleting the battery to off, and the same way we did before will connect to its charger and leave it unmolested until it reaches 100% again.
With this we have done correctly Wipe Battery Stats using the aforementioned application, now I will explain the same method but without using any third party application, we will from our Android Recovery.
(Recommended method): How to make Wipe Battery Stats of our battery from the ClockworkMod Recovery
- Connect the device to your power charger and wait for the battery is at 100%. Once tell us is 100%, we wait a half hour or more before disconnecting continue with the next step. The loads can do indifferently with terminal connected or disconnected.
- Once this 100% charged and having left that half hour, without unplugging the charger will turn off the terminal and will light in Recovery mode.
- Within the Recovery descend to the Advanced option and within select Wipe Battery Stats and confirm.
- Return to the main screen of Recovery, all without disconnecting charger, and select Reboot System Now.
- Wait for the device to start fully and once operative is when will disconnect the electric charger.
- As with the implementation must do two charging cycles, this means that we let the battery completely runs until the charge device and pull it off and unmolested until this 100%, once it is full the load will as before and leave it completely discharge to repeat the full charge without disturbing the device.
With this we have the battery of your Android properly calibrated and you've returned to the reality of their uploads and downloads now just will depend on how you use it to make you last longer or less.